Technology

Installing Cisco Jabber on Windows

Last modified 8/8/2024

Cisco Jabber is a client application which allows you to access presence, instant messaging, voice communications, and people search. For more information on Cisco Jabber please refer to the following article: Cisco Jabber

Install and Configure Cisco Jabber

To install and configure Cisco Jabber for Windows, do the following:

  1. Download and install Cisco Jabber.
  2. Launch Cisco Jabber after you’ve finished installing it.
  3. Log in with your ULID and password.
  4. After logging in, click the Settings Icon Settings.
  5. Put a check mark next to the option, Start Cisco Jabber when my computer starts.
  6. Click OK.
  7. Press the Computer icon in the lower-left corner of the contact list section.
  8. Hover the mouse over Use my phone for calls Cisco #### (model number varies depending on which desk phone you have).

The computer icon will change to an image of a phone and Cisco Jabber is now configured for use with your Cisco IP phone.

Trouble Connecting?

If you have trouble connecting to the server, try the following troubleshooting steps:

  1. Press the Settings Icon Help Show Connection Status.
  2. Scroll down to Presence in the Connection Status window.
    • Verify that the Address is set to ATCUCMIMP01A.ilstu.edu, the Protocol is set to XMPP, and the Port is 5222

If you have verified that the correct server information is being used but you still cannot connect, please contact the Technology Support Center at (309) 438-4357 (HELP) for additional help with troubleshooting.

How to Get Help

Technical assistance is available through the Illinois State University Technology Support Center at: